Cooling system finished

Today after a bit of advice from GBS, I was able to finish the cooling system.  All of the silicone pipes need cutting down and so does the extra long top Stainless steel hose. I set about cutting everything down and then fitted it all before sealing with the supplied brackets.  To support the length of the bottom bracket, there is a small metal fixing that needs fitting under the steering mounting bracket.  Annoying that I had to take it off, but needs must.  It then attaches to the cooling pipe using a cable tie.

Once everything was plumbed in, i filled it with water to ensure there were no leaks - there weren't! When I was happy, I drained the water and its now ready to fill with coolant.